TRENDnet 8-Port 10/100Mbps PoE Switch (4x 10/100, 4x 10/100 PoE) TPE-S44


TRENDnet

List Price: $78.99
Price: $59.99
You Save: $19.00 (24%)

Demo of PoE switch automatically rebooting unresponsive IP camera

RSS gratified: goo.gl Email updates: goo.gl When an attached PoE device fails to respond, Moxa's EDS-P510 can automatically present a hard reset on ...


Will a hub connected to a network downstream of a POE capable switch carry the POE?

Sep 14, 2008 by voss001 | Posted in Computer Networking

I am interested in aware if a hub or switch connected to a network downstream of a POE switch will carry the POE current on it's ports since they 192.168.1.70 carry all 8 wires as a rule. I realize this might be dependent on the specific downstream switch or HUB, so any general info based on experience is also appreciated. Thanks

It in fact just depends on the POE switch. Some are intelligent enough to sense if the device that is connecting requires POE and if it doesn't it won't push the electrical contemporary down the line. I would strongly advise going back to the manufacturers documentation and see what they say in regards to downstream devices not requiring POE.

Randy S | Sep 14, 2008

It should calling, however i would be careful as the power traveling through the hub may damage it. Check with the manufacturer for compatibility. You may also have a lower voltage on the connections downstream of the hub, your greatest bet is to use an injector downstream of the hub, so you don't blow the hub.

Best regards,
Hc
hc2995@ymail.com | Sep 14, 2008

It literally just depends on the POE switch. Some are intelligent enough to sense if the device that is connecting requires POE and if it doesn't it won't push the electrical contemporaneous down the line. I would strongly advise going back to the manufacturers documentation and see what they say in regards to downstream devices not requiring POE.
Randy S | Sep 14, 2008

How do I make my ORiNOCO PoE Switch work?

Mar 04, 2009 by Christopher D | Posted in Computer Networking

I have an ORiNOCO AE "Switch". I bought this on ebay. It seems to have a publicize that detects devices and turns on/off the power running to it. However, this feature seems to only work with orinoco devices. I have three Mitel IP Phones that I necessitate to work with this. Does anyone have a solution for this?

you lack to see what revision of PoE your Mitel phones require and what the switch supplies. Several companies released their own flavor of PoE before the 802.3af guideline was ratified by IEEE. Products released after that standard was ratified, may or may not power on with products that were released before the yardstick.

Slim J | Mar 04, 2009

can I connect a PoE switch to another PoE switch in cascade?

May 04, 2006 by Cyberia | Posted in Computer Networking

I pine for to connect a PoE 8 ports switch to an other switch which is PoE too, but non of them has an uplink port and I don't want to burn the ports

Barely make a crossover cable and if you are worried about burning up the port just cut off pins 4,5,7,8. Those are habituated to to power up a device. Hope this helps

atygnz | May 04, 2006

Poe Switch - News


Extreme Networks Delivers Simplicity and Control for the LAN's ... FOXBusiness
- Mar 24, 2009
Far-away Networks Delivers Simplicity and Control for the LAN's FOXBusinessThe ReachNXT 100-8t can be powered by an ExtremeXOS upstream PoE switch or by an exterior AC power adapter while the 1000Base X SFP is powered by an external wall adapter. EPICenter is a scalable network executives system that simplifies configuration,

Superior Six-in-one JetBox9310 PoE Networking Computer Strengthens ... PR-Inside.com (Pressemitteilung)
- Mar 23, 2009
Of a higher order Six-in-one JetBox9310 PoE Networking Computer Strengthens PR-Inside.com (Pressemitteilung), Austria5-port 10/100TX Managed Ethernet Switch: JetBox 9310 can also be configured as a 5-haven Managed Ethernet Switch, which acts as a network platform for security control and surveillance monitoring. 4. 4-mooring PoE switch: JetBox 9310 supports IEEE 802.3af