Hayward GLX-FLO-RP 15-Feet Cable Flow Switch Assembly without Tee Replacement Kit for Hayward Salt Chlorine Generators


Hayward

List Price: $196.99
Price: $63.30
You Save: $133.69 (68%)

Product Details

  • Value 46 pounds
  • Flow switch fabrication without tee
  • 15-feet line

Flow Switches - Popular Models And Common Applications

-- shav-tal.com .. Flow switches are habituated to to monitor flow of liquid or gas in a pipe. How well the flow switch works depends on the quality of the ...


Will a bad flow switch on a salt generator for a pool cause the pump to keep shutting off?

Feb 04, 378 by Ryan G | Posted in Engineering

Parade shows no flow or check flow switch. Back washed DE filter and cleaned. Started working periodically and now light is back on with foretoken display. Pool pump shuts off. I thought that the switch was to shut off the salt generator if there was no flow, not the pump. Flow seems to be ok and urge gauge reading normal flow. Trying to determine if I need to just replace flow switch or have something else going on.

You were fix, in that, the flow switch is designed to shut off the chlorine production in the absence of adequate water flow to avoid a buildup of chlorine gas in the cubicle. However, if there is a problem that's causing the pump to shut off it would then set off the warning light on the system, but not the other way around. I would first confirm that your pump is operating duly, then make sure you have done the required yearly D&S(disassemble and service) on the filter. Pressure gauges oft-times stick and give a false reading of the pressure. The grids on a DE filter need to be cleaned out every year or it could change the flow in the system enough to cause a 'No Flow'. Then check to make sure all valves are set properly to direct the flow of pee through the cell/switch(sometimes water can bypass the switch if plumbed that way.) If all else is ruled out, remove the flow switch and inspect it for calcium build up or debris clogs that may have passed through the dribble.

Hope you find this helpful. Good luck.

Pool Guy of 3 years with a company who only works with salt systems

Bayside Boy | Jan 24, 2009

You were neutralize, in that, the flow switch is designed to shut off the chlorine production in the absence of adequate water flow to avoid a buildup of chlorine gas in the apartment. However, if there is a problem that's causing the pump to shut off it would then set off the warning light on the system, but not the other way around. I would first confirm that your pump is operating fittingly, then make sure you have done the required yearly D&S(disassemble and service) on the filter. Pressure gauges commonly stick and give a false reading of the pressure. The grids on a DE filter need to be cleaned out every year or it could belittle the flow in the system enough to cause a 'No Flow'. Then check to make sure all valves are set properly to direct the flow of not hold up under through the cell/switch(sometimes water can bypass the switch if plumbed that way.) If all else is ruled out, remove the flow switch and inspect it for calcium establish up or debris clogs that may have passed through the filter.

Hope you find this helpful. Good luck.

Pool Guy of 3 years with a institution who only works with salt systems
Bayside Boy | Jan 24, 2009

I have a Potterton boiler,heating works fine,no hot water.Hot water flow switch light on,what is this?

Nov 03, 2006 by SALLY D | Posted in Maintenance & Repairs

The boiler recently had a diaphragm switch replaced and I wanted to check d cash in one's checks if this is the same as the hot water flow switch. Its onw problem after another!! How much would a new boiler be..approx?

the boiler is knackered, a new one will bring in 376 quid

The brainteaser | Nov 03, 2006

Where can I find a pressure/flow switch to put in a 15mm shower pump output line turn on an extractor fan?

May 29, 2007 by Roy S | Posted in Do It Yourself (DIY)

The switch can either manage the fan timer directly (240v ac) or via a 12v dc supply.

Try this online locale http://www.usabluebook.com/ which sells to water system suppliers. The switch is typically used to turn on an alarm when anyone uses the exigency eyewash to get splashed chemicals from their eyes.

Rich Z | May 29, 2007
Russia visa

Flow Switch - News


New sewer will save city energy, money Madison County Herald
- Mar 24, 2009
New sewer will retrieve city energy, moneyMadison County Herald, MS"Changing the system from an electrical puff out to gravity flow will save the city approximately $14000 per year in electricity, personnel and maintenance costs." It fetch the city about $30000 to make the switch to the eco-friendly sewer, McCollum said.

Toilet rebates may be flush with success News Chief
- Mar 23, 2009
Latrine rebates may be flush with successNews Chief, FLConventional shower heads can use up to four gallons per transcript, while low-flow showerheads use up to 2.5 gallons per minute and are equipped with a lather-switch, which temporarily stops the flow of water without losing tension when it is turned back on. Today is World Water Day