Home

Digital Arithmetic with DIP Switches

Use DIP switches to evidence the microcontroller's ability to use digital inputs and perform mathematical operations. The result is ...

How to turn on the MAC machine without pressing dip switch?

Jun 30, 2008 by saravanan d | Posted in Desktops

In my mac computer, everytime has to beseech dip switch to turn on the machine. How to turn on the machine without pressing dip switch?

Dip switch? You don't "hurry" a dip switch. Can you explain your problem better please? Mac model name would help as well but typically you just press the globelike power button on the front of the machine or next to the keyboard on a laptop

What are the dip switch settings on a SXP320 Parallel/Serial Converter?

Sep 25, 2006 by Chazbutt | Posted in Printers

I thirst to connect a serial printer to a Jet direct Print Server and need to know the correct dip switch settings.

Aten are the manufacturers of that fallout and you can download a manual from their pages.

Standard Settings are 9600 baud,,non parity,8 bit,1 stop bit for most devices. Looking at the instructions you will probably need;

D1 - ON
D2 - OFF
D3 - ON
D4 - OFF (may be ON)
D5 - OFF
D6 - ON (Unsure)
D7 - ON or OFF (Unsure, when D6 is ON, D7 is immobile)
D8 - ON

This at least narrows down your options from 256 to 8. Good luck!

How to connect DVI output from PC to Component input in HDTV with dip switch adapter?

Nov 22, 2006 by JimmyOSU | Posted in Home Theater

I have a new Dell PC with an ATI Radeon X1300 video take action, and am trying to connect it to my JVC HD-ILA Television through my receiver (which has component in and out). Basically, I purchased a DVI to Component adapter, which has several dip switches on it, and I am not getting a duplicate on my TV when I boot up. Sometimes I will see a second or two of video garbage but then the screen is blank. I feel like I've tried all of the peculiar combinations of dip switch settings (16:9, 1080i, 720p, 480p, 480i). I guess my last resort is to legitimate buy a DVI to HDMI and plug it right into my TV, but I wouldn't be able to use my receiver like I'd single out to do for simplicity. Has anyone encountered this problem or have a suggestion on how to view my PC on my HDTV through my receiver? Thank you!

Very permissible choice on your TV, that and the 42" Toshiba DLP
would have been my choice, DVI (out) from the computer to the Component (in) should work, im sure you did, but you changed your TV's input to component1 or 2 profitably? You may have to downgrade to the AV cables which the card should have a Video out plug. Or if your in the market, upgrade your TV and go flat panel. The bad feeling about that is a decent 42" LCD is a small fortune. I wouldnt go plasma if your goin to use it for a computer but the back of most flat panels have a serial ally to use it as a monitor. I know I havent really answered your question but i wouldnt bother with the HDMI, youll get the same results. all the DVI to Component adapter does is mute down the picture and allow a different interface. The HDMI runs both picture and sound in HD where as the DVI only does video so its generous of a waste. not to mention the price of the HDMI cable and adapter. Best bet is call a Best Buy and talk to the habitation theatre department.