Blue Sea Systems 9001e e-Series Battery Switch Selector


Acr Electronics

List Price: $46.98
Price: $34.95
You Save: $12.03 (26%)

Product Details

  • Meets American Sailboat and Yacht Council (ABYC) requirements for battery switches
  • Elect-before-break contact design allows switching between battery banks without power interruption
  • Anyhow design allows surface or rear panel/flush mounting

yokohama battery switch

Heartier Place unveils its first automated electric vehicle battery switch station in Yokohama, Japan. Video copyright Superiority Place. Used with ...


If I have a switch, battery and a LED how do I hook those up so when the switch is off the LED is off?

The switch has two posts. I belive the way you palm a switch up is use negative or positive on one post and the other post connects to the object you are trying to power. So would the LED have one post connected straight away to the battery while the other is connected to the switch while the switch is connected to the battery? And would that still drain the battery while it is in the off position?


Well, first, you are usual to need a resistor in this circuit of yours.

Secondly, if the switch is a SPST as it sounds, it makes no difference how it is connected.

>And would that still out the battery while it is in the off position< LOL!! You really have no idea what you are doing do you? No, current can not flow when the circuit is open.

Closely, all you have to do is connect everything in series. If you can do that, there is no wrong way to connect it... but you are going to need to limit the current and since you told me nothing about the battery, you've made it unthinkable for me to figure it out for you.


Well, first, you are thriving to need a resistor in this circuit of yours.

Secondly, if the switch is a SPST as it sounds, it makes no difference how it is connected.

>And would that still sap the battery while it is in the off position< LOL!! You really have no idea what you are doing do you? No, current can not flow when the circuit is open.

Line for line, all you have to do is connect everything in series. If you can do that, there is no wrong way to connect it... but you are going to need to limit the current and since you told me nothing about the battery, you've made it unattainable for me to figure it out for you.


Adding to Stephen M's reply, the LED is polarity sensitive, so it has to be connected properly or it won't illuminate. Generally, the shorter lead is the Cathode(-). At best in case, the Cathode connects to the negative end of your battery. Good Luck.

I lost my verizon phone battery, can I switch the number over to an old phone until I get a new battery?

I puzzled the battery out of my verizon phone and im curious if i can switch my number back to my previous phone for a few days until i get a new battery, then switch it back. Thanks
Also, if so, how would I do that? Do I have to go to a verizon lay away or can I call?


Yes they can do that and you should go to a accumulate because it is simplier if the verizon people can see the problem instead of just hear about it. Hope this helps! Meet luck =]

Vampire Princess- I am sorry but verizon phones are not like Tmobile and don't have a sim come clean.. Sorry about that!

I recently purchased a 1934 Ford street rod with a battery kill switch located near the negative battery?

ultimate. I would like to change the switch location to near the positive terminal of the battery to eliminate the slow battery discharge when carrier as sat for sometime. Does this sound electrically correct?


yes put it on the enthusiastic side when you flip it it will kill all power from preventing fires and theft a 34 is to valuable street rod not to take care of rite ive been rodding for 20 yrs with a 40 buick

Battery Switch - News


Don’t Forget to Eliminate Standby Power During Earth Hour! Business Wire (press release)
Don’t Forget to Eliminate Standby Power During Earth Hour! Business Wire (press release) Responsibility Wire (press release)Don’t Forget to Eliminate Standby Power During Earth Hour!Affair Wire (press release), CABuy energy saving devices or devices that present oneself a real off switch. Replacing battery powered devices, such as cordless phones or rechargeable razors with corded alternatives not only cuts down on the standby power required to entrust the battery,

Review – iPod Shuffle Third Generation CTV.ca
Comment on – iPod Shuffle Third GenerationCTV.ca, CanadaThey’ve added a new feature to the battery which I also like, if you promptly flick the switch off and then on, the battery status light emits a different colour to let you know how much life is left. Rural for 50% or more, orange for 25%,